The motherboard usually auto-detects the microprocessor. We can also configure the microprocessor by adjusting the jumper settings. Microprocessors can also be configured using the settings from the system Basic Input Output System (BIOS). The BIOS stores the system information.
Speed of the Microprocessor
The microprocessor is built and set to perform at the recommended speed. The recommended speed of the microprocessor is set below the maximum speed of the microprocessor. To modify the speed of the microprocessor using the system BIOS:
1. Start the system.
2. Press the Delete key on the keyboard to enter the BIOS setup.
3. Select CPU PnP from the displayed menu using the navigations keys specified besides the menu.
4. Press Enter to display CPU PnP setup screen that enables to modify the settings for the microprocessor.
5. Use the Page Up or Page Down key on the keyboard to select the required CPU Ratio. The CPU ratio is a multiplier that sets the microprocessor clock speed.
6. Press Esc to return to the BIOS main menu.
7. Press F10 to save and exit.
Overclocking
Overclocking the microprocessor increases the speed of the processor. You can overclock the microprocessor by changing the jumper settings on the motherboard. You can also overclock the microprocessor by increasing the CPU Ratio from the CPU PnP Setup Page from the BIOS settings. Additional cooling devices such as CPU fans must be installed to cool down the processor because overclocking makes the microprocessor heat up very fast. The extreme heat level can reduce the life of the processor and can also damage the processor. Overclocking must be implemented with care by increasing the clock speed little by little. You must also check the documentation of the microprocessor and the motherboard before overclocking. Overclocking a processor beyond its maximum capacity can permanently damage the microprocessor.
No comments:
Post a Comment